Article -> Article Details

The WiFi dead zones are quite frustrating. That guest room at the back of your home where internet signals disappear? Or the upstairs corner where videos keep buffering? If you experience the same issue then NETGEAR AC1750 (EX6250) WiFi Mesh Extender could be the fix you need.

This is not your usual plug-and-pray WiFi booster. It is a mesh-compatible extender. That means it blends into your existing WiFi setup, allows your device to stay on one stable connection as you walk around.

Before You Begin – Have These Essentials

Before diving into the setup, make sure that you have got a few things ready:

·         Your existing WiFi name (SSID) and password.

·         A wall socket near the router (for first-time setup).

·         A mobile phone or computer with WiFi.

·         A little patience.

Option 1: WPS Setup (The Easiest Way)

Make sure that your router should have a WPS button. This method does not require a laptop, passwords or even typing. Just two buttons and you are all done.

Steps:

1. Plug in the EX6250
Find a power outlet which is close to your router. Plug in the extender and wait until the power light turns solid green.

2. Press the WPS Button on the Extender
Hold the WPS button on the EX6250 for about 5 seconds. The WPS LED should start blinking.

3. Press the WPS Button on the Router
Within two minutes you have to press the WPS button on your router.

4. Wait for Confirmation
If the connection is complete then the router LED on the extender will turn solid white.

5. Place the Extender to Better Spot

Unplug the extender and relocate it somewhere in between of your router and your weak WiFi zone.
Check signal quality using the LED colors:

·         White = Excellent

·         Amber = Fair

·         Red = Poor

Note:
If your router does not have WPS then move on to the manual setup.

Option 2: Manual Setup (Using a Web Browser)

If you prefer more control or the WPS route didn’t work then here is how to do it manually. It takes a few extra steps but works for everyone.

Step-by-Step:

1. Plug In Near the Router
Insert the extender into a power socket close to your main router. Let it boot up fully and lights turn to solid.

2. Connect to the Extender's Network
On your phone or laptop, open your WiFi list.
Connect to NETGEAR_EXT (no password needed at this point).

3. Open a Web Browser
Open any browser such as Chrome, Firefix or Edge.

In the address bar, type:

·         www.mywifiext.net

·         or 192.168.1.250

Tip: Don’t type this in the search bar. Only the address bar at the top.

4. Complete the Setup Wizard
Once the extender’s page opens, follow the steps:

·         Select your existing home WiFi network.

·         Enter the WiFi password.

·         Choose if you want to keep the same SSID or give the extended network a different name (like MyHome_EXT).

5. Let It Configure
The extender will save the settings and restart. This takes 2–3 minutes.

6. Move the Extender to an Ideal Spot
Now unplug it and shift it to a better location somewhere between your router and your WiFi weak zone.

Helpful Tips to Avoid Setup Issues

·         Don’t place it too far from the router during first setup. Keep it close until it’s fully configured.

·         Keep it cool – these devices heat up. Don’t put it inside a cabinet or behind electronics.

·         Try the Nighthawk App (Optional) – it helps with monitoring your WiFi extender later, though not required.

·         Forget Old WiFi Settings – if your phone had previously connected to another extender, remove that from saved networks to avoid confusion.

Troubleshooting – If Setup Is not Working

1. No Lights or All Red LEDs?

·         Try a different socket.

·         Hold the reset button for 10 seconds using a paperclip to start fresh.

2. Can’t Reach Mywifiext.net?

·         Enter the IP address 192.168.1.250 instead.

·         Switch devices or browsers if the page still won’t load.

3. Setup Page Not Loading?

·         Double-check that you're connected to NETGEAR_EXT and not your regular WiFi.

Final Thoughts

The NETGEAR EX6250 AC1750 is a strong choice for anyone who is struggling with poor WiFi signals in parts of the house. It is a good fit for large homes or those with thick walls and it does the job without the need of full mesh router replacement.

Whether you went with the simple WPS method or took the manual browser route, once you have completed the setup, you will notice the difference and will get smooth and stable internet everywhere.